During the production and manufacture of the water channel mould, it is necessary to use the bending machine to make the steel plate, so that the steel plate can form a separate mould, and the shape of the steel plate is designed as U-shape. The mold is mainly used in our irrigation system. When the mold is used to produce concrete blocks, in order to facilitate production and speed up the progress of the project, the prefabricated production mode is generally used. The overall design of the water channel mold is divided into internal mold and external mold, and the steel plate is fixed by using screws. This mold style is very simple, and the operation is also very simple when the production is carried out. The overall use efficiency of the mold is significantly improved, and the overall turnover efficiency of the mold is accelerated. The thickness of the steel plate used in the water tank mold is about 5mm, which can ensure the overall stability of the mold, and the wear resistance of the mold with this thickness is also very good, which can be used for a long time in the project without worrying about the damage of the mold. The whole die is fixed by using screws, so that the sealing of the die is very good, and there is no leakage of the slurry when pouring the concrete slurry.
In fact, the water channel mold is commonly used in some water conservancy projects. In recent years, due to the continuous improvement of technology, the quality of the prefabricated parts of the water channel has also made a qualitative leap. At present, many projects have begun to use this kind of drainage channel gradually for construction, helping to speed up the progress of the project and making it more convenient for workers to use. The construction of drainage ditches on both sides of the road can ensure the dryness of the road. In some rainstorm weather, there will be a large amount of rainwater accumulation on the road. The construction of drainage ditches on both sides of the road can drain the rainwater in a short time if the cover plate is covered on the top. The vehicle will be safer when driving and will not be damaged. Moreover, when using the flow channel mold to process, it can ensure the quality of the prefabricated parts produced, and the size is also uniform. During the splicing construction, the gap should be filled with special materials. Of course, the flow channel mold can be made circularly, and there is no need to worry about the use time of the mold.