设为首页    收藏本站

 保定市华庆模具制造有限公司首页
      产品列表
电缆槽模具
公路排水沟模具
排水沟模具
排水沟钢模具
水沟模具
水渠模具
排水渠模具
排水槽模具
U型槽模具
流水渠模具
      资质荣誉
      联系我们
保定市华庆模具制造有限公司
地 址:保定市东城工业区
电 话:18831266588
联系人:边经理
传 真:0312-8103818
在线QQ:107108222@qq.com
最新资讯

排水渠模具的组装步骤介绍

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

排水渠模具是钢模具其中的一种,因为尺寸与形状多变能够使用到的工程也会比较的多,而且急流槽预制件在加工成型后才会进行施工,在实际使用的时候需要注意到的就是模具的组装,如果在拼接的时候模具有着缝隙,那么浇筑上泥浆后就会让模具出现泥浆泄漏的问题,自然也就不能够制作出合格的的急流槽投入到各项的工程中。排水渠模具在通过浇筑水泥生产挡渣墙的时候,需要按照一定的步骤进行生产,从而才能够保证混凝土制品的整体产品质量。今天我厂为大家简单介绍以下该如何使用流水槽模具进行安装,使其能够用于生产。

The drainage channel mold is one of the steel molds. Because of the variable size and shape, more projects can be used. Moreover, the construction of the prefabricated parts of the chute will be carried out after the processing. In the actual use, attention should be paid to the assembly of the mold. If there is a gap in the mold when splicing, the slurry leakage will occur in the mold after pouring the slurry Therefore, it is impossible to produce qualified chute for various projects. In order to ensure the overall product quality of concrete products, the drainage channel mould should be produced according to certain steps when pouring cement to produce slag retaining wall. Today, our factory briefly introduces how to use the runner mold to install, so that it can be used in production.

组装排水渠模具的时候需要检查好每一个使用到的螺栓与卡扣,螺栓都是会根据就模具的型号大小进行使用,并且螺栓也需要和模具一样,在不使用到的时候涂刷上防锈油存放。组装的时候要将模具接口对准,使用卡扣固定整齐后,用电动扳手将螺栓一个一个的组装在上面,如果螺栓出现生锈或者是泥浆粘连的问题也是需要仔细清理干净的,拼接好的模具先检查有没有缝隙或者是遗漏的位置,接下来便是涂刷脱模剂注入泥浆了,凝固后立即拆模,取下固定模具的螺栓,排水渠模具拆开后就可以了仔细检查有没有粘连到大量的泥浆,不能够使用外力强行拆模,也要避免尖锐物品剐蹭模具。

When assembling the drainage channel mold, it is necessary to check every bolt and clasp used. The bolts will be used according to the model size of the mold, and the bolts should be coated with antirust oil when not in use. When assembling, the mold interface should be aligned. After the snap is used to fix the bolts orderly, the electric wrench is used to assemble the bolts one by one. If the bolts rust or the slurry adhesion problem occurs, it is also necessary to clean them carefully. The spliced mold should first check whether there is any gap or missing position, and then brush the mold release agent, inject the mud, and then erect it after solidification That is to remove the mold, take down the bolts that fix the mold, and after the mold of the drainage channel is disassembled, carefully check whether there is a large amount of mud adhered. Do not use external force to forcibly remove the mold, but also avoid sharp objects scratching the mold.


【上一个】 排水沟钢模具的使用方式介绍 【下一个】 水渠模具如何保证产品质量


 · 排水渠模具的组装步骤介绍

排水沟模具-排水沟钢模具-公路排水沟模具-保定华庆水沟模具厂 |防撞墙模具|塑料路牙石模具|流水槽钢模具|检查井钢模具|沟盖板模具|