The drainage ditch steel mold is not only to use the mold according to the correct steps during the operation, but also need to pay attention to some protection treatment of the mold during the operation. In fact, many workers will not pay attention to the protection when the mold is used, but take maintenance treatment after the mold is used. Although it can also have the maintenance effect, it can still create Some of the wear of the finished mould was aggravated. Every production detail is fully paid attention to when the drainage mold is manufactured. From the material selection of farmland channel mold production to the formal use of machine production, each link will go through many production tests. After determining the processing sequence and processing intensity, the mold can be produced. This is also a point considered by the manufacturer for the quality of the mold. For different specifications of molds, customized farmland channel mold is actually a very good choice, which can make simple adjustment and modification of production conditions according to the actual demand and the requirements of mold. When the mold production determines the selected raw material model, the manufacturer will prepare the materials and production tools according to the customer's budget. Although the mold price is not the primary consideration, the mold price will also affect the normal use.
As for the steel mold of drainage ditch, the protection in the process of our use is very simple. First of all, the mold needs to be wiped after the assembly, because if the prefabricated rectangular groove mold is maintained in the warehouse, it is inevitable that some dust will adhere to the surface. If some protective agent is mixed, it will become some dirty situation, and the mold needs to be wiped clean at the edges and corners It also needs to be cleaned up. One of the release agents or engine oil should be applied to the inner cavity of the prefabricated rectangular groove mold. In fact, the better suggestion is to use the release agent. Because the release agent is a professional processing material, it has a better effect than the engine oil. When the release agent is applied, it will form a protective layer, which will not let the mud adhere to the mold directly. This is very convenient when the mold is removed, After the bolt is removed, the rectangular groove preform can be directly removed.