设为首页    收藏本站

 保定市华庆模具制造有限公司首页
      产品列表
电缆槽模具
公路排水沟模具
排水沟模具
排水沟钢模具
水沟模具
水渠模具
排水渠模具
排水槽模具
U型槽模具
流水渠模具
      资质荣誉
      联系我们
保定市华庆模具制造有限公司
地 址:保定市东城工业区
电 话:18831266588
联系人:边经理
传 真:0312-8103818
在线QQ:107108222@qq.com
最新资讯

流水槽模具的操作步骤及要求

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

流水槽模具是整个公路、铁路、水利等排水体系的建设,因此要引起重视,我们在设计的时候大多会忽略掉施工时候产生的问题,包括流水槽的尺寸规格和具体情况不符合,而且照搬规范和规定,不具备灵活性,而且大多的工程建设在进行施工的时候并没有将表土送到取土坑当中进行还田,很有可能造成土地资源的浪费

The gutter mold is the construction of the whole highway, railway, water conservancy and other drainage systems. Therefore, we should pay attention to it. Most of our design will ignore the problems arising from construction, including the non-compliance of the dimensions, specifications and specific conditions of the gutter, and the copying of specifications and regulations is not flexible, Moreover, most of the engineering construction did not send the topsoil to the borrow pit for returning to the field, which is likely to cause a waste of land resources

流水槽模具,农田流水槽模具,流水槽钢模具厂家 梯形流水槽模具的排水能力受到了肯定,它主要受到了边坡的坡度、截面的形状和尺寸以及土地的质量影响,因此流水槽的形状也是非常重要的,经常使用到的形状就是U型流水槽,是因为这种形状的流水槽不仅排水效果很好,而且还要注意到使用流水槽地段的降水量,这样在多雨的季节也能充分发挥作用。流水槽模具运输的时候要注意堆放的规范,钢面板可以进行横向摆放,而零件也应该放在一起,避免丢失,在运输的过程当中要使用帆布进行遮挡,这样能够有效防止日光照射,避免雨淋风吹而导致模具的质量受到影响。

The drainage capacity of the trapezoidal gutter mold has been affirmed. It is mainly affected by the slope of the slope, the shape and size of the section and the quality of the land. Therefore, the shape of the gutter is also very important. The commonly used shape is the U-shaped gutter, because this shape of gutter not only has good drainage effect, In addition, pay attention to the precipitation in the section where the water trough is used, so that it can play a full role in rainy seasons. Pay attention to the specification of stacking during the transportation of chute molds. The steel panels can be placed horizontally, and the parts should also be placed together to avoid loss. Canvas should be used for shielding during transportation, which can effectively prevent sunlight and the quality of molds from being affected by rain and wind.

流水槽模具在使用时操作简单方便,需要按照一定的操作步骤来进行制作,这样可以保证制作的产品的质量。首先,在使用之前需要对模具进行检查,检查U型流水槽模具是否完好平整,这样可以避免因为模具的原因而出现表面不平整的情况,影响模具的正常使用,不平整的产品在使用寿命上也是比较短的,需要频繁的更换,浪费人力和时间。检查完成后需要对模具内腔进行抹油,这样可以避免在脱模时出现粘连的情况,省去了很多麻烦,并且也可以提高制作产品的成功率。抹油完成后就是进行安装了,模具分为内模和外模,使用需要使用螺丝进行组装,在安装时要避免出现缝隙,缝隙会导致制作时出现漏浆的情况,造成无法挽回的损失。

The operation of the flow channel mold is simple and convenient, and it needs to be made according to certain operation steps, so as to ensure the quality of the products. First of all, the mold needs to be checked before use to check whether the U-shaped water chute mold is intact and flat. In this way, the surface irregularities caused by the mold can be avoided, which will affect the normal use of the mold. The uneven products also have a short service life and need to be replaced frequently, wasting manpower and time. After the inspection, the inner cavity of the mold needs to be smeared with oil, which can avoid adhesion during demoulding, save a lot of trouble, and improve the success rate of making products. After the oiling is completed, the installation is carried out. The mold is divided into internal mold and external mold. It needs to be assembled with screws. During installation, the gap should be avoided. The gap will lead to slurry leakage during fabrication, resulting in irreparable losses.


【上一个】 排水渠模具的优势及制作方法 【下一个】 排水槽模具的使用特点及生产方式


 · 流水槽模具对道路建设的作用 · 流水槽模具的操作步骤及要求
 · 流水槽模具-公路流水槽模具-高铁流水槽模具厂家 · 流水槽模具的现浇生产过程

排水沟模具-排水沟钢模具-公路排水沟模具-保定华庆水沟模具厂 |防撞墙模具|塑料路牙石模具|流水槽钢模具|检查井钢模具|沟盖板模具|